Products Description
- The Hangchi Sanchi planet-type hydraulic power shift transmission delivers significant traction in combined operating conditions, enhancing the reliability of the transmission system.
- The rear axle employs a transverse hydraulic cylinder-type steering system. This configuration offers a compact structure for the steering axle, with a transmission angle of 70.5°. This setup reduces resistance, minimizes tire wear, and improves driving comfort.
- The vehicle utilizes four heavy caliper disc brakes along with thickened brake discs and a rear air tank. With an 18 times braking pressure strength ratio, these brakes provide faster heat dissipation, ensuring reliable and safe operation.
- Incorporating a hydraulic load-sensing steering system, the rear steering axle boasts a small turning radius, enabling flexible and light steering.
- This vehicle is widely employed in environments characterized by high work intensity such as airports, ports, docks, stations, warehouses, and other settings for loading and unloading, stacking, and short-distance transportation.
Here are some key operational guidelines
Pre-Operation Inspection:
Before using the forklift, conduct a thorough inspection of the vehicle. Check for any leaks, tire conditions, fluid levels, brakes, steering, lights, and controls to ensure everything is in proper working condition.
Make sure the load capacity matches the weight of the load you intend to lift.
Operator Training:
Only trained and certified individuals should operate the 35-ton diesel forklift. Proper training ensures they understand the machine's capabilities and limitations.
Safety Gear:
Always wear appropriate personal protective equipment (PPE), including a hard hat, safety boots, high-visibility clothing, and gloves.
Operating Procedures:
Start the forklift according to the manufacturer's instructions. Ensure the engine is warm before operation.
Drive at a safe speed, especially when carrying heavy loads or in congested areas.
Avoid abrupt maneuvers, sudden stops, or sharp turns that may destabilize the forklift and its load.
Maintain a clear line of sight by looking in the direction of travel and keeping the load at a safe height.
Load Handling:
Assess the weight and stability of the load before lifting. Distribute the weight evenly on the forks and secure the load properly.
Use caution when raising or lowering loads to prevent tipping or loss of control.
Never exceed the forklift's specified load capacity.
Environmental Considerations:
Be aware of the surrounding environment, including any obstacles, uneven surfaces, or hazardous conditions that could affect safe operation.
Exercise caution when operating on ramps, slopes, or inclines.
Communication:
Use audible signals (horns) when approaching intersections, blind spots, or when pedestrians are nearby.
Maintain clear communication with ground personnel and other forklift operators in the vicinity.
Parking and Shutdown:
Park the forklift in a designated area when not in use. Apply the parking brake, lower the forks to the ground, and switch off the engine.
Store the forklift in a secure location to prevent unauthorized access.
Regular Maintenance:
Follow the manufacturer's recommended maintenance schedule for the forklift. Regular servicing helps ensure its continued safe and efficient operation.
Adhering to these operational guidelines promotes a safer work environment and reduces the risk of accidents when operating a 35-ton diesel forklift. Always prioritize safety and proper handling procedures.
Product parameters
|
Configuration |
Model |
Unit |
CPCD350 |
|
|
|
|
|
TMF350 |
|
|
Performance |
Rated load |
kg |
35000 |
|
|
|
Load center |
mm |
1250 |
|
|
|
Mast tilt angle (front/rear) |
o |
6/12 |
|
|
|
Overall dimensions |
Length |
mm |
9700 |
|
|
|
Width |
mm |
3320 |
|
|
|
Height |
mm |
4310 |
|
|
|
Mast lifting height |
mm |
3500 |
|
|
Fork size (L*W*H) |
mm |
2440*340*125 |
|
|
|
Min. turning radius |
mm |
7260 |
|
|
|
Max. travel speed (with load) |
km/h |
28 |
|
|
|
Lifting speed (with load) |
mm/s |
260 |
|
|
|
Gradeability (with load) |
% |
20 |
|
|
|
Weight |
kg |
43000 |
|
|
Tyre |
Front |
|
4*16.00-25/32PR |
|
|
|
Rear |
|
2*16.00-25/32PR |
|
|
|
Wheel tread |
Front |
mm |
2800 |
|
|
|
Rear |
mm |
2450 |
|
|
Wheelbase |
mm |
4800 |
|
|
|
Min. ground clearance |
mm |
350 |
|
|
Engine |
Model |
|
WD10G240E21 |
|
|
|
Rated power/rotate speed |
Kw/r.pm |
175/2200 |
|
|
|
Max. torque/rotate speed |
N.m/r.pm |
1000/1600 |
|
Our Company
Xiamen TOPWAY Machinery Co., Ltd. is a giant company in the construction machinery industry. It is proud of its achievements since its establishment in 1992. It also focuses on developing a series of products such as wheel loaders, excavators, road rollers, graders, and bulldozers.
Production Process
Topway attaches great importance to quality control and adopts a comprehensive and all-around quality control system to strictly control every link in the production process and strive to achieve the best quality.
Our Certificate
We believe that the pursuit of excellence in quality control is the core of the company's continuous progress, so we have never stopped along the way.
After-sales service
We have a complete support system from procurement, logistics and distribution, and factory cooperation to after-sales service, providing customers with stable and secure services.
contact us
Tel: +86-592-6286561
Whatsapp/Phone/Wechat: +86-18650110966
Email: sales@topwaymachine.com
Fax: +86-592-6286562
Address: Room1513 15th Floor 270th Changhao Road, Huli District Xiamen, Fujian, China
Hot Tags: 35ton diesel forklift, China 35ton diesel forklift manufacturers, suppliers, factory
